Take control of the operating temperature of your 5.9L or 6.7L Cummins with this Fan Clutch Accelerator Switch from Driven Diesel. When enabled, the Fan Clutch Accelerator will cause your ECM to think that your Engine Coolant Temperature has increased, thereby causing your ECM to command more fan speed from the clutch. When disabled, the ECM will see the correct temperature from the coolant temperature sensor, and operate the fan normally.
This product is designed to be used "AS NEEDED", leaving it enabled all the time will result in running the engine fan excessively, causing more engine noise, lower fuel economy and a reduction in power. If you have experienced situations where your truck and load are causing coolant and oil temperatures to rise, but you aren't hearing your fan engage to aid in cooling, this is your answer.
Specifications
- SkuDD-DFCS
- ManufacturerDriven Diesel
- MPNDD-DFCS
- Will NOT work on 2003-2007 Automatic Transmission Trucks
- When enabled, your dash gauge and/or digital monitor will reflect a higher than actual Engine Coolant Temperature. In order to see the actual coolant temperature, the Fan Clutch Accelerator must be in the OFF position.
- Installation and use of the Fan Clutch Accelerator Switch WILL NOT resolve problems with a weak or worn out fan clutch. Proper performance of this product requires a correctly functioning fan clutch.
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
Driven Diesel Fan Clutch Accelerator Switch 05-07 5.9L Manual Trans | 07.5-20 Ram 6.7L Cummins
Quantity: 0
Cart Total$0000.00